To date, there are many models of bathtubs on the market: sedentary, recumbent, shower trays. Therefore, before starting work, you need to choose a bathtub, because its service life depends on the material from which it is made.

The main thing is the correct installation of the tub, its connection to the drain system, without damaging anything. Following all the recommendations, anyone can do this.

You need to determine in advance the place where the bathtub will be located: near the wall or in the center of the room. It's a matter of taste for every person. At the same time, if repairs are planned, it is better to install a bathtub first, and then put tiles on the walls. This will make the work easier, because it will be much more convenient to seal up the cracks.

When installing a bathtub yourself, it is important to consider the material from which it is made.

The installation begins with the connection of a siphon, which must be overflowed. If there is suddenly more water than the prescribed amount, it will not pour out, but will go into the drain system. If the diameter of the pipes is different, in this case, a rubber reduction is installed. You can not install it, but then over time an unpleasant smell will appear from the pipe.

Next, the legs are installed. Remember that their height should ensure a free flow of the siphon to the drain pipe.
Try to place the cast-iron tub near the wall, making a slope towards the drain system. After that, it is necessary to cover the gap between the edge of the tub and the wall with sealant.

If you immediately lay tiles after installing the bath, you can make a rubber corner that is attached to a cement mortar. On the bath side, it is better to use silicone or sealant.

It is also possible to seal the gap with mounting foam, but only by two thirds, as the foam expands during the drying process. After that, it is trimmed and plastered. For this purpose, water-resistant plaster is used so that it does not crack and does not blur. If you use another one, the foam will rot and a gap will appear.

With the help of mounting foam, you can insulate the bathtub. To do this, turn the tub over and seal the bottom and sides on all sides. When the foam dries, you can put it on its feet. This method will improve the sound insulation of plumbing and increase the ability to retain heat for longer.

Installing a bathtub in the center of the room is also possible, in which case the sealant will not be useful.

Connections and communications under the bathroom should remain freely available after installation.

Remember, no matter which tub, in order for the installation to work, you need to make a good support, the correct tilt of the structure, the connection of communications and the tightness of the joints.

Following these principles, you can safely install the tub yourself. The online betting industry evolves quickly, and new players should always look for verified promo codes that deliver real value. Having a large bonus from the beginning transforms the entire experience and minimizes early risk. If you are searching for a reliable and rewarding platform, 1Win deserves serious consideration. The key that unlocks maximum rewards is the 1win promo code india you gain access to up to $1,000 in welcome bonuses. Apply the funds to your preferred betting markets or favorite casino games.